Open-source self-replicating 3-D printer factory for small-business manufacturing

The International Journal of Advanced Manufacturing Technology

July 2016,Volume 85,Issue 14,pp 633642Cite as

Additive manufacturing with 3-D printers may be a key technology enabler for entrepreneurs seeking to use disruptive innovations such as business models utilizing distributed manufacturing. Unlike centralized manufacturing, distributed manufacturing makes the parts and products (the prints) at (or closer to) the source of the demand, cutting out much of the traditional supply chain. Although many expect 3-D printing to take off at the household level and previous work has shown significant returns for those choosing to do so, there are still significant barriers to entry for typical consumers. Our analysis demonstrates that for an individual to make an abnormally high return on their investments in 3-D printers, they must serve others to achieve high utilization rates. The impetus to do so is created by a service that can undercut traditionally manufactured products due to affordability and customizability. Low-cost, open-source 3-D printers are now priced within range of individual entrepreneurs who can take advantage of the long tail of consumers with highly varied interests. The margin advantage, net present value, and return on investment (ROI) analysis provided herein could form the basis of thousands of new small-business ventures in the coming years.

The online version of this article (doi:10.1007/s0-9) contains supplementary material, which is available to authorized users.

Unable to display preview.Download preview PDF.

Unable to display preview.Download preview PDF.

Case 2. MOST Delta RepRap BOM and total cost table (XLS 18 kb)

Case 3. Quad Delta RepRap MOST Delta RepRap BOM and total cost table (XLS 18 kb)

The Economist (2012) A third industrial revolution. April 21, 2012

Blua A (2013) Radio free europe radio library A new industrial revolution: the brave new world of 3D printing

Gibbs S (2013) Metal 3D printing and six key shifts in the second industrial revolutionthe guardian

Vinodh S, Sundararaj G, Devadasan SR, Kuttalingam D, Rajanayagam D (2009) Agility through rapid prototyping technology in a manufacturing environment using a 3D printer. J Manuf Technol Manag 20(7):10231041

Wohlers Associates (2014) Wohlers report 2014: additive manufacturing and 3-D printing state of the industry annual worldwide progress report. Wohlers Associates, Fort Collins, Co

Make (2013) Make: ultimate guide to 3D printing, Oreilly, Winter 2013

Jones R, Haufe P, Sells E, Iravani P, Olliver V, Palmer C, Bowyer A (2011) RepRapthe replicating rapid prototyper. Robotica 29(1):177191

Wittbrodt BT, Glover AG, Laureto J, Anzalone GC, Oppliger D, Irwin JL, Pearce JM (2013) Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers. Mechatronics 23:713726

DeVor RE, Kapoor SG, Cao J, Ehmann KF (2012) Transforming the landscape of manufacturing: distributed manufacturing based on desktop manufacturing (DM)2. J Electron Packag 134(4):61801

Pearce JM, Blair CM, Laciak KJ, Andrews R, Nosrat A, Zelenika-Zovko I (2010) 3-D printing of open source appropriate technologies for self-directed sustainable development. J Sustain Dev 3(4):1729

Sells E, Smith Z, Bailard S, Bowyer A, Olliver V (2010) Reprap: the replicating rapid prototyper: maximizing customizability by breeding the means of production. In Piller FT, Tseng MM handbook of research in mass customization and personalization: strategies and concepts (Vol. 1). World Scientific

Pearce JM (2012) Building research equipment with free, open-source hardware. Science 337(6100):13031304

Pearce JM (2014) Open-source lab: how to build your own hardware and reduce research costs, Elsevier

Lcking TH, Sambale F, Beutel S, Scheper T (2014) 3D-printed individual labware in biosciences by rapid prototyping: a proof of principle. Engineering in Life Sciences

Gross BC, Erkal JL, Lockwood SY, Chen C, Spence DM (2014) Evaluation of 3d printing and its potential impact on biotechnology and the chemical sciences. Anal Chem 86(7):32403253

Pearce JM (2014) Laboratory equipment: cut costs with open-source hardware. Nature 505:618

Herrmann KH, Gärtner C, Gllmar D, Krämer M, Reichenbach JR (2014) 3D printing of MRI compatible components: why every MRI research group should have a low-budget 3D printer. Med Eng Phys 36(10):13731380

Wijnen B, Hunt EJ, Anzalone GC, Pearce JM (2014) Open-source syringe pump library. PLoS ONE 9(9):e107216

Gonzalez-Gomez J, Valero-Gomez A, Prieto-Moreno A, Abderrahim M (2012) A new open source 3-D-printable mobile robotic platform for education. In Advances in autonomous mini robots (pp. 49-62). Springer Berlin Heidelberg

Zhang C, Anzalone NC, Faria RP, Pearce JM (2013) Open-source 3-D-printable optics equipment. PLoS ONE 8(3):e59840

Leigh SJ, Bradley RJ, Purssell CP, Billson DR, Hutchins DA (2012) A simple, low-cost conductive composite material for 3D printing of electronic sensors. PLoS One 7(11):e49365

Anzalone GC, Glover AG, Pearce JM (2013) Open-source colorimeter. Sensors 13(4):53385346

Redlich T, Wulfsberg JP, Bruhns FL (2008) Virtual factory for customized open production. Presented at the 15th International Product Development Management Conference, Tagungsband

Martens T, Mears L, Dotson M, Graham M, Sanger P (2011) Use of fused deposition modeling of polyphenylsulfone for centrifugal casting of polyurethane: material, surface, and process considerations. J Manuf Sci Eng 133(5):051003

Baechler C, DeVuono M, Pearce JM (2013) Distributed recycling of waste polymer into RepRap feedstock. Rapid Protyping J 19(2):118125

Mireles J, Kim H, Lee H, Espalin D, Medina F, MacDonald E, Wicker R (2013) Development of a fused deposition modeling system for low melting temperature metal alloys. J Electron Packag 135(1):011008

Anzalone GC, Zhang C, Wijnen B, Sanders PG, Pearce JM (2013) Low-cost open-source 3-D metal printing. IEEE Access 1:803810

Makexyz, Find a 3D printer near you.

Christensen CM, Bower JL (1996) Customer power, strategic investment, and the failure of leading firms. Strateg Manag J 17(3):197218

U.S. Energy Information Administration, Table 5.6.A Average retail price of electricity to ultimate customers by end use sector, EIA-Electricty Data. [Online]. Available:

MarketWatch (2012) Retail markups and the power of Amazon.

Pearce JM, Dekenberger D, Zielonka H (2009) Accelerating applied sustainability by utilizing return on investment for energy conservation measures. Int J Energy Environ Econ 17(1):6180

Van der Wijst N, Thurik R (1993) Determinants of small firm debt ratios: an analysis of retail panel data. Small Bus Econ 5(1):5565

Newell R, Pizer W (2001) Discounting the benefits of climate change mitigation: how much do uncertain rates increase valuation? Economic Technical Series, Pew center on Global Climate Change: Arlington VA

Kreiger MA, Pearce JM (2013) Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products. MRS Online Proceedings 1492, mrsf12-1492-g01-02

Kreiger M, Pearce JM (2013) Environmental life cycle analysis of distributed 3-D printing and conventional manufacturing of polymer products. ACS Sustain Chem Eng 1(12):15111519

Branker K, Pathak MJM, Pearce JM (2011) A review of solar photovoltaic levelized cost of electricity. Renew Sustain Energy Rev 15:44704482

King DL, Babasola A, Rozario J, Pearce JM (2014) Development of mobile solar photovoltaic powered open-source 3-D printers for distributed customized manufacturing in off-grid communities. Challenges Sustain 2(1):1827

Pearce J (2002) Photovoltaicsa path to sustainable futures. Futures 34(7):663674

Pearce JM (2012) The case for open source appropriate technology. Environ Dev Sustain 14:425431

Hoyle W (2013) Designing the future, tech for trade.

Feeley SR, Wijnen B, Pearce JM (2014) Evaluation of potential fair trade
standards for an ethical 3-D printing filament. J Sustain Dev 7(5):112

Engstrom NF (2013) 3-D printing and product liability: identifying the obstacles. U Pa L Rev Online 162:3583

Safety Standard for Childrens Toys (2015)

Bradshaw S, Bowyer A, Haufe P (2010) The intellectual property implications of low-cost 3D printing. ScriptEd 7(1):531

Pearce JM (2015) A novel approach to obviousness: an algorithm for identifying prior art concerning 3-D printing material. World Patent Inf. doi:

Hunt EJ, Zhang C, Anzalone N, Pearce JM (2015) Polymer recycling codes for distributed manufacturing with 3-D printers. Resour Conserv Recycl 97:2430

Department of Materials Science and Engineering

Department of Electrical and Computer Engineering

Laplume, A., Anzalone, G.C. & Pearce, J.M. Int J Adv Manuf Technol (2016) 85: 633.

Unlimited access to the full article

Include local sales tax if applicable

The International Journal of Advanced Manufacturing Technology

Learn about institutional subscriptions

We use cookies to improve your experience with our site.

Over 10 million scientific documents at your fingertips

© 2017 Springer International Publishing AG. Part ofSpringer Nature.

Not logged inNot affiliated116.77.73.253