Was 3D Printing Just a Passing Fad?

It seems like once a decade there comes a technology so transformative it spawns several companies that become giants: Chips in the 70s (Intel, AMD), PCs in the 80s (Apple, Microsoft, Dell), the Internet in the 90s (Amazon, Google, eBay).

There are also innovations that are potentially just as disruptive but that, from the standpoint of investors, never offer an early chance to get in on the ground floorthe way Microsoft or Google did when they first went public.

Take nanotech, an investor fad a decade ago that faded because it wasnt startups that brought it to market, but diversified giants like Intel and GE. Or solar energy, an important technology that is requiring decades to become a mainstream product but that involves costly manufacturing plants along the way.

And then theres 3D printing, which is looking like one of those important but hard-to-invest-in technologies. For a while, it was looking like there were a few publicly traded stocks that could offer an early entry point in another promising technology but over the past year or so, its been looking more like another speculative frenzy playing itself out.

For decades, the technology that led to 3D printing was used in industrial design, creating quick and relatively cheap prototypes that could be tweaked without having to retool an entire manufacturing process. Then, around 2012, the buzz about the potential of 3D printing began to grow louder: It could could make customized shoes, empower DIY hobbyists, manufacture synthetic organs. Stratasys, an early pioneer in the field, even moved toprevent its printersfrom making homemade guns.

Along with the buzz, stocks of 3D printers caught fire. In the two years through 2013, Stratasys saw its stock surge 333%. That was nothing compared to 3D Systems, another pioneer in the field that expanded quickly by buying dozens of small companies in the space. 3D Systems enjoyed an 800% surge in its stock in the same two-year period.

Some punditsargued3D Systems was a better long-term investment than Facebook or Apple. Others in the sector like ExOne and VoxelJet went public in 2013 and saw their stock prices double from their offering prices. But near the end of 2013, aswarning signs emergedthat the rally couldnt last despite the technologys promise, things took a turn.

Since early 2014, most of the stocks in the 3D printing industry have collapsed. Stratasys, 3D Systems, ExOne and VoxelJet have lost between 71% and 80% of their market value in the past 17 months. The reasons why are nothing new to investors who have speculated too early in promising technologies: Profits can be hard to come by, and revenue can fall short of expectations.

Recent earnings from Stratasys and 3D Systems suggest things are getting worse rather than better in 2015. In late April, Stratasyswarnedthat its revenue would be much lighter this year than analysts had been expecting, while net income would also be smaller. Only three months earlier, the company issued a similar warning of disappointing earnings.

Stratasys announcement came a few days after 3D Systems issued its ownwarningthat revenue and profit would be well below expectations. Both companies cited vague macroeconomic factors like higher oil prices and a strong dollar, which were forcing customers to cut back on capital spending.

Analysts werent buying those excuses. 3D Systems effort to explain the sharp pullback in unit demand was lacking, and Stratasys really doesnt try, Oppenheimer analyst Holden Lewis wrote. The problem wasnt in 3D printing technology, which proponents say is finallydelivering on its potentialandstill holdsenormous potential in the future.

Instead, as is often the case with emerging technologies, the passage into a mainstream market is proving to be a slow and rocky one. Stratasys, for example, bought Makerbot in 2013 to get a foothold in the consumer end of the 3D printing market but consumers have been slow to buy in. Makerbots revenue fell 18% last quarter.

The bigger threat for 3D printing companies is that bigger, deeper-pocketed rivals like HP are making a belated but major push into the market, which may be giving customers pause. Corporate buying managers are delaying purchases while they anticipate HPs multi-jet fusion product in 2016, Dougherty & Co. analyst Andrea Jameswroterecently.

Such broader concerns about 3D printing companies have dragged down the stocks of ExOne and Voxeljet as well, even after a mixedearnings reportfrom the latter last month. Balancing the short-term demands of investors with technologies that take a long time to mature predictably leads to volatility. If things dont turn around soon, some companies may be bought by a giant like GE.

But just because the hype surrounding 3D printing got out of hand quickly doesnt mean the technology itself isnt promising. Theres still plenty of potential in the market longer-termthere is in cleantech and nanotech. It will just take time to deliver on that potential. And meanwhile, speculative investors who are characteristically short on patience move on to the hottest new technology idea.

Sign up to receive the top stories you need to know now on politics, health, money and more

Subscribe today and save up to 84% off the cover price.

Sign up to receive the top stories you need to know now on politics, health, money and more

© 2017 Time Inc. All Rights Reserved. Use of this site constitutes acceptance of ourTerms of UseandPrivacy PolicyYour California Privacy Rights).

TIME may receive compensation for some links to products and services on this website. Offers may be subject to change without notice.